Nautilus Lifeline Port Devices Driver Download

Posted on

The original Nautilus Radio has been discontinued.

Nautilus LifeLine Radio puts safety into the hands of everyone in, or on the water. Nautilus LifeLine Radio is depth rated to 425 feet (cap closed) and is a very simple, but incredibly clever way to call or send a distress message to boats around you up to a demonstrated range of 34 miles. The Nautilus LifeLine Radio works everywhere in the world.

Firmware 1.02

Download depths and decompression status, maximum depth, bottom time, descent/ascent rates, ambient temperatures, surface intervals, and all warning points entered during the dive. This product is a must for the serious diver. Kit includes USB Cable, Cradle and CD-ROM disk. Cressi's Newton/Drake PC Download Kit works with Windows and Mac. On January 30th I plugged in my lifeline to recharge it and connected it to the Windows client app. I then tried to update my Lifeline to the latest firmware, which Nautilus say on their support page 'has gone through extensive testing but we want to make darn sure that the upgrade performs perfectly in as many scenarios as possible all over the world'.

Firmware version 1.02 incorporates an updated user interface that is very intuitive. For a full explanation of the changes, please see page 12 and page 13 of the Operations Manual (Available Below). Please follow the steps below if you are interested:

Latest: Feb, 2015
Firmware Update (V1.02)

Manuals

Operations Manual 1.02
Operations Manual 0.80
Quick Start Guide-EN.FR.DE
(FR) Manuel des opérations
(DE) Bedienungsanleitung
(ES) Manual De Instrucciones
Chinese(S) 中文简体
Chinese(T) 中文繁体

Desktop Software

PC (XP, Vista, 7, 8, 10)
Mac (OS X 10.5 – 10.11)
Desktop Software Readme

Technical Specification

VHF GPS Specifications
Supported Channels
CE Declaration of Conformity
CE Declaration of Compliance

Nautilus Lifeline Port Devices Driver Download Windows 10

LifeLine Radio Specifications

Size & Weight
Weight 9.88 Oz (280 g)
Dimensions
2.6'W x 5.72'H x 1.8'D (67x145 x46 mm)
Power & Battery
Battery
1850mAh Li-on Rechargeable
Battery Capacity
24 Hrs +
Maximum RF Power
1.85 Watts + 0dB / -3.5dB
Depth Rating & Communication Range
Depth Rating
425 Feet (130 Meters) with cap closed
Voice Communication Range 2-6 Miles (3-10 Km) depending on antenna height
Distress Range (Red Button)
Transmits DSC alerts/ GPS to boats up to a demonstrated range of 34 miles (55 km)
Frequency Range
All Marine Channels
GPS Stores up to 30 Waypoints
Channel Spacing
25 KHz
Exterior
Material Polycarbonate, 316 L Stainless Steel
Floating YES with cap closed
Display Type
LCD

This page contains Nautilus LifeLine Radio support troubleshooting information. If you have a Nautilus Marine Rescue GPS, please contact us for support.

Where do I get an MMSI number?

This depends on where you are located in the world as every country will have its own marine authority which handles MMSI numbers.

The important thing to know is that once you have an MMSI number, it will make your LifeLine fully functional anywhere in the world. There is no need to change this number if you are travelling.

Port

Please follow this link for more detailed information about MMSI numbers: MMSI Information

How do I change my MMSI number?

Normally, you will have no need to change your MMSI number. However, if, for example, you make a mistake when entering the number, it can be changed. International regulations state that only the radio manufacturer may change an MMSI number.

The Nautilus LifeLine Radio is the only marine radio that allows this change WITHOUT sending it back to the factory. Email your name, LifeLine serial number and place of purchase to [email protected] and we will reset your MMSI. All you have to do after that is to connect your LifeLine to the Desktop Software and you will receive a prompt telling you that your MMSI number has been cleared. If this does not appear right away, click the Updates tab, then the Software Settings tab, and then “Check for Software Update”.

Nautilus Lifeline Port Devices Driver Download Windows 7

I have an MMSI number. How do I enter it into the LifeLine?

With your LifeLine connected to the Desktop Software, click the Apps tab, then Customize Settings. You will see a field on the right side of the screen where the number can be entered. Enter your MMSI number and click “Apply MMSI Number to LifeLine”.

What does the “Show GPS Points on a Map” button do?

After you have taken your LifeLine out and acquired a few GPS points (up to 32 points will be saved) you can then come back, connect your LifeLine to the Desktop Software, and click this button. This will open up a map displaying the locations where you have been with the LifeLine.

My LifeLine doesn’t turn on. What do I do?

This may indicate one of two things: either your LifeLine is low on charge, or the LifeLine requires firmware installation. Both can be resolved; instructions detailed below.

1. If your LifeLine is very low on charge, it is possible that nothing will display on the screen until it is connected to power for up to 20 mins. At this point, we suggest that you leave the LifeLine connected until the Green light is extinguished.

Important: Disregard the indicated charge percentage for the first connection of your LifeLine. Your LifeLine is not fully charged until the green light has extinguished.

2. If the LifeLine is connected to a power source and the screen does not turn on, this is an indication that the firmware has been erased on your LifeLine and needs to be repaired by doing the following:

Ensure that your LifeLine desktop software is running – software is available from the LifeLine Radio page.

Connect your LifeLine to your computer.
Watch for any prompts indicating ‘New Hardware’, ‘Scan and Fix’, or ‘A LifeLine has been found with no Firmware’. If any of these prompt a scan or a search, click yes and follow the prompts.

If these prompts do not come up, please try an alternative USB port on your computer until you hear the Windows “chime”. For a Mac see: How do I update the firmware on a Mac, below.

Try doing a 3 button reset on the LifeLine while it’s connected. (hold down all 3 buttons for 3 seconds).
If you have issues with a particular operating system (Win 7, Vista, XP), please contact us.

How do I update the firmware on a Mac?

Updating the firmware on a LifeLine using a Mac computer requires the use of a bootable Live CD.

Download motherboard by zotac laptops & desktops driver. ZOTAC GeForce Graphic driver 461.40 for Win 7 64bits (GeForce 30) OS: Windows 7 64-bit. ZOTAC B150 Mining ATX Motherboard for Cryptocurrency Mining with 7 PCIe x1 slots - Maximize Mining bandwidth and speed with 7x PCIe slots - up to 32GB DDR4 2400 memory, Gigabit LAN - Intel HD Graphics ready, HDMI output - LGA 1151, Intel 7th / 6th Gen Core i3, i5, i7 ready (up to 65W TDP). ZOTAC - The original creators, pioneers, and manufacturer of Mini PCs and innovators of the fastest NVIDIA GeForce GTX Gaming Graphics Cards.

It is not possible to use Virtualization technologies such as Parallels, VMWare, or Virtualbox to connect to a LifeLine or update the firmware.

You only need the LifeLine Live CD if you are trying to update firmware using a Mac. You may also use a Windows PC to complete the firmware update.

Download the live cd file and follow these steps:

Insert a blank writable cd or dvd into your cd burner.
Start “Disk Utility”.
From the File menu, choose “Open Disk Image” and select the lifeline-livecd.iso file to be burned.
In the list of volumes, you will now see an item representing the lifeline-livecd.iso file. Select it.
Click the Burn button and follow the prompts and instructions given by the program.
Once the CD is burned, make sure the CD is in the CD/DVD drive and restart the computer.
Hold the “c” key immediately when the computer restarts to boot from the disc.
If you see a screen where “ccccccccc” is being printed across the screen, release the “c” key and press the “Enter” key to start booting from the cd.
Once the operating system has booted, access the LifeLine desktop software through Applications > Other > LifeLine Setup.
Plug the LifeLine into the computers USB port and it should connect automatically.
Follow the prompts to update the LifeLine’s firmware.

NOTE: If the computer is running on wireless internet from the Live CD the Software Update check and Registration by internet will fail. These can be completed when you are NOT using the Live CD with the Mac desktop software on any wifi or wired connection.

What do I do if my LifeLine doesn’t connect to the Desktop Software?

Sometimes your computer may not recognize the LifeLine when you first plug it in. Please try the following:

If one USB port doesn’t work, try a different port.
Disconnect and reconnect the LifeLine as well as close and reopen the software.
Try pressing and holding all three buttons on the top of your LifeLine (Red, Green and Orange) for three seconds. This will do a hard reset on your LifeLine, and may improve connectivity.

How do I get a GPS lock?

In order to get a GPS lock on your LifeLine, please ensure the following:

  • Your LifeLine has the most up to date firmware from the desktop software.
  • Your LifeLine is on, the top cap is open, and the antenna is extended and pointed skyward.
  • You are outside with a clear view of the sky.

Allow a moment for the LifeLine to acquire satellites in view – the number of satellites is represented at the top right hand corner of the screen. Once the LifeLine has a GPS lock, the numbers will change to a + . At this point, your GPS location will be represented on your LifeLine screen, accurate to within 5 meters.

How do I change the green button Chat Channel?

Nautilus Lifeline Port Devices Driver Downloads

To change the channel of the Green Button on your LifeLine, there are two simple options. Before trying either of these options, ensure that your dive region selected on the “General” tab on the LifeLine desktop software is appropriate to your next dive location.

From the General tab, changing the Chat channel will update the LifeLine automatically, however, the new channel will not be activated until the LifeLine is disconnected from the computer.

Alternatively, you can change your channels on the fly without using a computer by following the steps below:

  • Turn on your LifeLine.
  • Quickly press the Green Button 3 times to enter “Select Channels” Mode. This may take a few tries.
  • You may cycle through the channel list by repeatedly pressing the Green Button.
  • Once you have chosen your desired channel, press and hold the Green button to select and confirm.

What should I do if I am traveling with my LifeLine?

Be aware of the regulations of the country that you are visiting.
Change your dive region using the LifeLine software to the appropriate setting.

Note: You do NOT need to change your MMSI number when traveling.

Nautilus Lifeline Port Devices Driver Download

I’m getting “Installer Integrity Error” when I try to install the Desktop Software. What do I do?

This can happen depending on the specific security settings if you are using Internet Explorer, usually IE6. This typically happens when the file download is incomplete. We recommend that you try downloading the Desktop Software using an updated version of Internet Explorer or by using another browser such as Firefox or Google Chrome.

How do I change the battery on my LifeLine?

Changing the battery on your LifeLine is something that must be done by the manufacturer. In order to change the battery on your LifeLine, you can send the LifeLine to us by mail and for a fee of $59.99 we will examine the LifeLine and install a new battery.

Nautilus Lifeline Port Devices Driver Download Win 7

Attempting to change the battery on your own will void the warranty. Please do not attempt to do so.

Having trouble updating your Firmware? Read this:

You may encounter a firmware update failure where your LifeLine running firmware 0.64 or earlier is unable to update. The firmware update process will appear to start but the LifeLine will just reset and the firmware will not update. The software will report that it cannot find the LifeLine and ask if you can see it in “My Computer”.

If this happens several times and you are unable to update your firmware, please use one of the following methods to completely run down your battery, then try the firmware update again.

Method 1 – Continuous Position Reports (MMSI # required)

  1. Ensure your LifeLine is registered and has an MMSI number entered, this method will not work without an MMSI number
  2. Go to the Apps tab and click on the Group Call button (software 0.3.61+)
    • This is the Advanced > Fleet Mode tab in older software versions
  3. Enter a Host Boat MMSI such as 123456789
  4. Select “Continuous Position Reports” and click “Apply Settings to LifeLine”
  5. The General tab should then say “Red Button – Continuous Position Reports” at the bottom
  6. Disconnect your LifeLine from your computer
  7. Press the Red button for three seconds to enable Continuous Position Reports (this is not distress mode)
  8. Leave your LifeLine running continuous position report mode until the battery is completely drained
  9. During position report mode the LifeLine will appear to go to sleep and wake up as part of the DSC cycle. This is normal and expected.

Method 2 – Transmit and/or long timeout (MMSI # not needed)

  1. Under Apps > Customize Settings set the Timeout (min) to 180
    • This is the Advanced > Settings tab in older software versions
  2. Disconnect your LifeLine from your computer
  3. Press the transmit button repeatedly or leave your LifeLine awake to run down the battery – it may take several hours to completely drain the battery
  4. Wake up the LifeLine if it shuts off to continue draining the battery
  5. Leave your LifeLine awake until it will no longer wake up when you push a button

For either of these methods transmitting on the chat channel will help run down the battery faster. When the LifeLine will no longer wake up from a button press, plug it in to your computer and connect to the software to try the firmware update again. It may take a few minutes of being plugged in for your LifeLine to wake up when it has been completely drained.

If after completely draining your battery you are still unable to update the firmware, please contact your local dive shop for help, or our tech support team at: [email protected] or +1-604-241-1918.

We wish you safe diving and strongly encourage all Lifeline users to ensure that your firmware is up to date with v1.02.

– Captain Mike and the team at Nautilus Lifeline.