Minato Electronisc Port Devices Driver Download

Posted on
Driver
Programming Target Low voltage device from 3.3v to 1.4v such as NOR, NAND flash ROM and flash embedded microcontroller.
*For programming, a socket unit is required. Please contact to Minato or Minato distributor for detail.
Memory size Standard 4Gbit (512Mbyte)
Max. 256Gbit (32Gbyte) as an option
The number of simultaneous programmingMax. number of simultaneous programming : 16
Operating Mode COPY: Copy data from flash ROM to the buffer memory of the programmer
BLANK: Blank check of flash ROM
VERIFY: Verify data in flash ROM and the buffer memory of the programmer
ERASE: Erase data in flash ROM
PROGRAM: Program and verify data
CONT: Continuous operation of BLANK+PROGRAM+VERIFY
*If BLANK is failed, ERASE mode is added.
Data InputRS232C, USB2.0, Copy from master ROM, Copy from compact flash card
InterfaceRS232C, USB2.0, Compact Flash Card
Display40 x 4 (characters) LCD
Power SupplyFrom AC100 to AC240V (automatic change) , From 50 to 60Hz
Measurement378(W)x150(H)x402(D)mm
Weight9kg(Without socket unit)
Power Consumption100VA(Max.)
Recommended TemperatureFrom 5 to 35°C
Devices

The CH340 chip is used by a number of Arduino compatible boards to provide USB connectivity, you may need to install a driver, don’t panic, it’s easier than falling off a log, and much less painful.

Serial Port free download - Port Detective, Serial Key Generator, Advanced Port Scanner, and many more programs. Download SAMSUNG Mobile MTP Device Driver 2.9.201.1018 (Mobile Phones).


Windows

(Manufacturer’s Chinese Info Link)

  1. Download the Windows CH340 Driver
  2. Unzip the file
  3. Run the installer which you unzipped
  4. In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system.
Devices

Older Windows Driver Version and Instructions

DevicesMinato Electronisc Port Devices Driver Download
  1. Download the Windows CH340 Driver
  2. Unzip the folder.
  3. If you are running a 64Bit Windows: – run the SETUP_64.EXE installer.
  4. If you are running a 32Bit Windows: – run the SETUP_32.EXE installer.
  5. If you don’t know, try the 64 bit and if it doesn’t work, the 32 bit.
  6. In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system.

Macintosh

(Manufacturer’s Chinese Info Link)

The following github has up to day pkg files for 1.3, 1.4 and 1.5 at time of writing, thanks to Joshua Wallis for bringing this to my attention…

Minato Electronics Port Devices Driver Download Windows 10

Direct Download Links (from the github repo above):

See the github link above for installation instructions if you need them.

Previous macinstosh downloads if the above doesn’t work for you…

(V1.3) Download the CH340 Macintosh Signed Driver for Mavericks (10.9), Yosemite (10.10) and El Capitan (10.11) and Sierra (10.12)

Inside the zip file you will find a PDF and a “pkg” file, short version, double click the pkg file, the PDF has some extra information.

OSX Sierra (10.12) Note

A kindly user, Maarten Segers reports

FYI, the driver documented here WILL crash on OSX Sierra.

The NB5 can be connected via a USB cable or an Ethernet cable or both. The reason for this is that the USB connection is simply an ethernet simulation, as far as your computer is concerned the USB connection is an Ethernet connection, hence DHCP and other protocols will work the same as for Ethernet. View and Download NetComm NB5 quick start manual online. ADSL2+ Ethernet/USB Modem Router. NB5 network router pdf manual download. Netcomm nb5 usb network & wireless cards driver download. NB5 delivers the connection versatility needed to cater for today’s ADSL users. You can simply attach the NB5 to a single PC by using the USB port. Alternatively, should you wish to share your internet connection with up to 253 users, the NB5 is equipped with an in-built Router and a 10/100 Ethernet port for connection to a network system. YML763Rev2 NB5 Quick Start Guide www.netcomm.com.au 5 NB5 Package Contents Your NB5 Package contains the following items:. Telephone Cable (RJ-11). RJ11 to 605 Adaptor. USB Cable. Power Adaptor (AC 15V). CAT-5 UTP Straight Ethernet Network Cable (RJ-45). Driver and Manual CD.

Make sure to use this one instead: https://github.com/MPParsley/ch340g-ch34g-ch34x-mac-os-x-driver

I can personally not test on MacOS and can not vouch for the above drivers at github, but there you go.

See uninstalling information at the bottom of the page if the driver causes problems for you.

Here is an older version of the Mac driver, NOT FOR 10.12 Sierra

(V1.0) Download the CH340 Macintosh Signed Driver for Mavericks (10.9), Yosemite (10.10) and El Capitan (10.11)

Linux

Minato Electronics Port Devices Driver Downloads

(Manufacturer’s Chinese Info Link)

Drivers are almost certainly built into your Linux kernel already and it will probably just work as soon as you plug it in. If not you can download the Linux CH340 Driver (but I’d recommend just upgrading your Linux install so that you get the “built in” one).

Uninstalling From Macinstosh

A couple of Mac users have said “the driver crashes my mac Sierra how do I uninstall”.

Firstly regards the crash make sure you installed the 1.3 version of the driver, not the old one. You could download it directly from the Manufacturers Website in case they have issued an update since I wrote this page.

Minato Electronisc Port Devices Driver Download

Secondly a quick google search reveals that this is how you uninstall:

  1. Open a terminal and type: cd /Library/Extensions/
  2. Verify that the .kext file is present: ls grep usbserial.kext
  3. Output should be: usbserial.kext
  4. Then type: sudo rm -R usbserial.kext
  5. Verify that the .kext file has been removed: ls grep usbserial.kext
  6. Output should be empty.
  7. After you should remove the files stored in receipts folder: cd /private/var/db/receipts/
  8. Find the enties: ls grep usbserial*
  9. Output should be: codebender.cc.ch34xinstaller.usbserial.pkg.bom codebender.cc.ch34xinstaller.usbserial.pkg.plist
  10. Remove each one of the files of the above list: sudo rm -r filename`