Drivers MSI USB Devices

Posted on

Summary :

  1. Drivers Msi Usb Devices Pc Camera
  2. Drivers Msi Usb Devices Usb

Do you know how to access MSI boot menu? What are the MSI boot menu key and MSI BIOS key? In this post, MiniTool Partition Wizard shows you how to do that. In addition, it also offers solutions to fix MSI boot menu key and MSI BIOS key not working issue.

If this option is not set, the computer will put the USB4 driver to sleep and cause a loss in communication with any attached USB4 device. Version: This download contains an updated version of the USB4MultipleDevices demo. The following software components are all found in USB4Setup.msi (version 1.11): USB4.dll 1.9.0.0 (32-bit). Download launch port devices driver. To install, open Device Manager Universal Serial Bus controllers right-click USB Root Hub (USB 3.0) Uninstall Device reboot PC. To re-install a specific device, navigate to the above but select Properties Driver Update Driver to install from your PC.

Quick Navigation :

How to Access MSI Boot Menu

UsbDrivers msi usb devices pc camera

Boot menu is always related to computer booting process. The booting process is as follows: POST first detects the peripherals and devices to make sure the hardware is ready; next, the computer accesses the BIOS firmware and then assigns to boot from the boot device with the first priority; finally, read the assigned boot device to enter the operating system.

Sometimes, you need to open boot menu and change the boot order for the following two reasons:

  • The computer doesn't boot into operating system. You need to check the boot menu.
  • You need to change the boot device, for example, you want to boot MSI from USB.

Anyway, you need to access the MSI boot menu. To access MSI boot menu, here are two ways:

  • Upon powering on the PC, please start hitting the MSI boot menu key—[F11]—continuously to enter the boot device selection.
  • Upon powering on the PC, hit the MSI BIOS key—[Del]—key continuously to enter the BIOS menu; navigate to [Boot] > [Boot mode select] and select [LEGACY+UEFI] & [UEFI]; select [Boot Option#1] to choose [UEFI HARD DISK] or [HARD DISK]; finally, select [UEFI Hard disk Driver BBS Priority] or [Hard disk driver BBS Priority] and set [Boot Option#1] as the boot device.

Through the above ways, you can boot into the operating system you want to enter.

In recent years, lots of users intend to update MSI BIOS. It is not a simple operation. This post will walk you through a full guide for MSI BIOS update.

Can't Get to BIOS or MSI Boot Menu

In general, entering MSI BIOS or MSI boot menu is very simple. But some people report that they can't enter MSI BIOS or MSI boot menu. In this case, there are 3 ways for you to solve this problem.

Way 1: Use PS/2 Keyboard

This solution is provided by a MSI motherboard user. He said there is a problem with USB keyboards that the USB keyboards are not recognized by the computer until the OS starts to load. Therefore, the MSI boot menu key and MSI BIOS key are not working.

To solve this problem, you just need to switch the current USB keyboard to the old PS/2 keyboard. If you have a PS/2 keyboard, you can try this method. If you don't have such a keyboard, just try the following ways.

Way 2: Turn Off Fast Startup

If you can boot into Windows, you can use this method. Please refer to the following steps:

  • Boot into Windows and then open Control Panel.
  • Navigate to System and Security> Power Options > Choose what power buttons do.
  • Click Change settings that are currently unavailable, uncheck Turn on fast startupoption and hit Save changes.

Way 3: Enter UEFI Firmware Settings

If your computer can't boot into Windows, you can use this method. Please refer to the following steps:

  • Power on and off your computer continuously 3 times to enter Windows Recovery Environment.
  • Navigate to Troubleshoot > Advanced options > UEFI Firmware Settings.
  • Click Restart to enter BIOS and change UEFI settings.

Drivers Msi Usb Devices Pc Camera

After performing the above methods, your keyboard can respond to your commands in computer booting process.

-->

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

Original product version: Windows 10, version 1703
Original KB number: 4021854

Symptom

When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

Cause

This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.

Resolution

To fix this issue, use one of the following methods.

Method 1

To resolve this issue, install update 4022716.

Method 2

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Method 3

USB

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Note

See the device manufacturer's user guide for specific instructions about how to install the driver.

Method 4

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

  1. Install the device-specific driver (see Method 2).
  2. Open Device Manager.
  3. Right-click (or tap and hold) the name of the device, and then select Uninstall.
  4. Restart the computer.

Drivers Msi Usb Devices Usb

When it restarts, Windows will try to reinstall the device by using the device-specific driver.