Drivers Innomtek USB Devices

Posted on

USB Drive Not Showing Up in Windows

  1. You safely remove the USB device from the USB port. You reconnect the same USB device or a different USB device to the same USB port on the hub. In this scenario, the computer does not detect the USB device. Note This issue affects USB 2.0 hubs and USB 2.0 components in USB 3.0 hubs. This issue occurs because the USB port is disabled.
  2. For all devices (24) other devices (3) chipsets (9) input devices (2) Bluetooth devices (2) sound cards (3) video cards (2) Wi-Fi devices (1) network cards (1) controllers (1) Windows 10 x64 all systems Windows 10 x64 Windows 10 x86 Windows 8.1 x64 Windows 8.1 x86 Windows 8 x64 Windows 8 x86 Windows 7 x64 Windows 7 x86 Windows XP x86.

About USB Network Adapter Drivers: When connected, the operating system usually installs a generic driver that helps the computer to recognize the newly attached device. However, proper software.

'I've tried all the methods I can think of to connect this USB flash drive to my PC, but my computer still does not show up any signals of the drive. All of my projects from this semester are stored on the drive, how can I get to my files?!”

Many users, including you now, have found their USB flash drive or external hard drive not showing up on their Windows PC. Before indicating the possible reasons for this issue, I'd like to know what your specific situation is. Generally, when you say your USB drive is showing up, you mean it disappears from File Explorer. Is your USB drive not showing up in Windows File Explorer but can be seen in Disk Management? Or Is it missing from both Windows File Explorer and Disk Management?

To make it clear, go to 'This PC' > 'Manage' > 'Disk Management' and check whether your USB drive shows up. Specify your situation and choose the corresponding tips to follow.

Since there are many reasons why a USB will not be detected by a PC, we offer a number of solutions. Follow these methods and get your missing USB drive back without losing any data. If you are a Mac user, having the same problem, follow this page to fix USB flash drive not showing up on Mac with ease.

Fixes for USB Drive Not Showing Up in Windows 10 File Explorer Only

If your USB drive shows up in Disk Management, it means Windows can still detect your drive. But due to some reasons, the USB cannot show up in File Explorer as expected. The reasons are:

  • USB driver issues
  • Drive letter conflicts
  • File system errors

The solutions vary based on the causes but all detailed below. Follow to fix your problematic USB with ease.

Workable SolutionsStep-by-step Troubleshooting
Fix 1. Update USB DriverConnect USB flash drive or external USB to PC..Full steps
Fix 2. Reinstall Disk DriverRight-click 'This PC', click 'Properties', 'Devices Manager'..Full steps
Fix 3. Recover USB DataConnect USB flash drive to PC, run USB data recovery software..Full steps
Fix 4. Resolve Drive Letter ConflictsRight-click 'This PC', select 'Manage' > 'Disk Management'..Full steps
Fix 5. Fix File System ErrorsRight-click on the 'Start' icon > Type computer management..Full steps

Situation 1. USB Drive Not Showing Up Due to USB Driver Issues

If there is something wrong with your USB driver, the USB drive will not show up in Windows 10 File Explorer and may show up as unallocated space under Disk Management. When your USB flash drive or USB external hard drive is unallocated space because of driver errors, follow the methods below to make it usable again.

Method 1. Update USB Drive Driver

DriversDrivers Innomtek USB Devices

Step 1. Connect the USB flash drive or external hard drive to PC, right-click on 'This PC' (in Windows 10) and choose 'Properties'.

Step 2. Click 'Device Manager' then expand “Disk drives”. Find and right-click the problematic USB drive and select 'Update driver'

Step 3. Click 'automatically search for driver software online'.

Step 4. Wait for the driver to be updated, then reboot your computer. Afterward, you can try to reconnect your USB drive to PC and check whether the USB drive shows up or not.

This method can also be helpful in solving disk-related issues like 'The system cannot find the file specified'

Method 2. Reinstall Disk Driver for USB Drive to Make It Show Up on PC Again

Step 1. Right-click 'This PC' and choose 'Properties' > 'Devices Manager'.

Step 2. Click on 'Disk drives', right-click on your USB drive that is not showing up in Windows 10 and choose 'Uninstall device'. (Make sure you have selected the correct USB device.)

Step 3. In the prompt asking you to confirm the removal, click 'OK'. (Wait patiently and let the process finish. If it takes too long, you can remove the USB flash drive from the PC.)

Step 4. Restart your computer and reconnect the USB flash drive/external hard drive to the PC. After the computer restarts, the driver will be automatically installed.

Method 3. Recover Data and Create New Partitions

If your USB still won't show up in Windows 10 and show up as unallocated space in Disk Management after updating or reinstalling the driver, you are recommended to recover data from your USB drive and then create new partition to make it ready for data storage.

If the USB shows up in Disk Management, but you’re unable to open the drive. It is time to use recovery software to get back your data. To recover files from unallocated space, you can use the hard drive recovery software - EaseUS Data Recovery Wizard. EaseUS data recovery software will help you recover files from your USB drive that shows up as unallocated effectively. It allows you to restore data from an inaccessible, RAW, or formatted USB drive and other storage devices with a few simple clicks. You can download it now and follow the guidance provided below to restore data from your USB flash drive easily.

Generally, unallocated space will show up as lost partition in EaseUS Data Recovery Wizard. Select the correct partition and then start the scanning process.

To recover data from the USB drive:

Step 1. Run USB data recovery software.

Connect the USB flash drive to your computer and launch EaseUS USB data recovery software on your PC. Select your USB drive which marks as a removable disk, and click 'Scan' to start finding your lost files.

Step 2. Scan all lost files from USB.

EaseUS Data Recovery Wizard will thoroughly scan your USB flash drive and find all your lost data on it. After the scanning process, use the Filter feature to filter a specific file type. You can check and preview found USB files in this program.

Step 3. Restore all lost files from USB.

Innomtek

A double-click will allow you to preview the file results. Choose the target files and click 'Recover' to save them to a secure location on your PC or other external storage devices.

You may need further help for tough data loss situations like reformatting drive, RAW disk, partition loss, repartition failures and system boot error. Consult with EaseUS Data Recovery Experts for cost-efficient one-on-one manual recovery service. They could offer the following services after FREE diagnosis:
1. Unformat the drive
2. Repair the RAID, RAW disk or operating system
3. Recover lost partition (the one that cannot be recovered by software)

Iveco spa driver download windows 10. After retrieving your precious file, now you can create new partitions on your storage device and make it usable again.

To create new partitions on the USB drive:

Step 1. Go to 'This PC', right-click it and choose 'Manage' > 'Disk Management'.

Step 2. Right-click the unallocated space and choose 'New Simple Volume'.

Step 3. Follow the wizard to finish the remaining process.

Now your USB drive should show up in Windows as usual. You can copy the files you recovered back to your USB according to your needs.

Situation 2. USB Not Showing Up in Windows Due to Drive Letter Conflicts

If the drive letter of your USB drive is the same as one of the drive letters of your computer hard disk partition, you won't be able to see it in Windows File Explorer. Besides, you will see the drive has no drive letter in Disk Management. Actually, it's quite simple to solve the problem in such a case. You only need to assign a new drive letter to your USB drive.

Step 1. Go to 'This PC', right-click it and choose 'Manage' > 'Disk Management'.

Step 2. Right-click the volume on your USB flash drive/external hard drive and select 'Change Drive Letter and Paths'.

Step 3. In the new window, click 'Change'.

Step 4. Assign a new drive letter to your USB and click 'OK'.

Situation 3. USB Not Showing Up in Windows Due to File System Errors

If your USB flash drive or external hard drive has file system errors, you will see your device show up as RAW and your device will become inaccessible. Here the file system error refers to an unsupported file system by Windows or damaged file system caused by misoperations or improper formatting. To repair hard drive with file system errors, the best way is to format the drive to convert RAW to NTFS or FAT32. By doing so, you assign a new file system to your device and then you can use it as you like.

But hold on.

When you format your USB drive, all data will be deleted. Since the USB drive shows up in Disk Management, you can use EaseUS data recovery software to get all of the data off the drive before you format it. The software also supports RAW device recovery. Thus, follow the article about how to recover data from RAW USB drive to rescue your data in advance.

After getting all data back, you need to format the USB drive to convert the file system back to NTFS or another Windows-compatible file system, which allows you to store data again.

Step 1. Right-click on the 'Start' icon > Type computer management > click on 'Computer Management'.

Step 2. Click 'Disk Management' in the bar on the left-hand side, then find the device in the drive viewer.

Step 3. Right-click on the USB flash drive, select 'Format' to directly format the USB drive to make it usable.

In order to avoid data loss trouble, it's highly recommended for you to perform USB data recovery to restore data from the RAW USB drive. But if you've already formatted, don't worry, this data recovery software can help you restore data before or after formatting the USB flash drive.

Fixes for USB Not Showing Up in Windows File Explorer and Disk Management

If your USB is not showing up in Windows File Explorer and Disk Management simultaneously, the reasons could be:

  • USB driver issues
  • USB port/cable error
  • Physical corruptions of USB

Follow to fix your problematic USB with ease.

Workable SolutionsStep-by-step Troubleshooting
Fix 1. Fix Driver IssuesThe USB not showing up issue caused by problematic device drivers..Full steps
Fix 2. Change USB ConnectionTry other ones on the same computer, switch from the front USB..Full steps
Fix 3. Fix Physical CorruptionsThe only suggestion for you is to send the USB drive for manual repair..Full steps

Situation 1. Driver Issues

Whether the USB drive shows up in Disk Management or not, the USB not showing up issue caused by problematic device drivers can be potentially solved by updating or reinstalling the USB driver. For the detailed steps, you can refer to the first two methods in the last part.

Situation 2. USB Connection Failure

Connection failure may be the root cause. It's a hardware problem that you can easily identify by checking the USB connection. Generally, there is more than one USB port on your computer. Try other ones on the same computer, switch from the front USB ports to the rear USB ports, or connect your USB drive to another computer and check whether the problem remains. Similarly, you can also change another USB cable if you are using an external hard drive.

Situation 3. Physical Corruptions

Drivers Innomtek Usb Devices Wireless Adapter

If the tips above fail to fix your USB drive that is not showing up in Windows, it's highly likely there is physical damage or corruption on your USB flash drive or external hard drive. This is the toughest situation and the only suggestion for you is to send the USB drive for manual repair.

The Bottom Line

When a USB flash drive does not show up on your Windows PC, it means that the computer has failed to read the USB drive. Therefore, in order to get a USB drive to show up, we must make the USB readable again. There are many methods for you to make an unrecognized USB drive to show up on PC: update USB flash driver, change drive letter, use Windows’s built-in disk management tool to detect the USB and more. Hope one of them can be helpful to fix your USB drive.

-->

This topic is intended for OEMs who want to build a Windows 10 system with USB Type-C connector and want to leverage OS features that allow for faster charging, power delivery, dual role, alternate modes, and error notifications through Billboard devices.

A traditional USB connection uses a cable with a USB A and USB B connector on each end. The USB A connector always plugs in to the host side and the USB B connector connects the function side, which is a device (phone) or peripheral (mouse, keyboard). By using those connectors, you can only connect a host to a function; never a host to another host or a function to another function. The host is the power source provider and the function consumes power from the host.

The traditional configuration limits some scenarios. For example, if a mobile device wants to connect to a peripheral, the device must act as the host and deliver power to the connected device.

The USB Type-C connector, introduced by the USB-IF, defined in the USB 3.1 specification, addresses those limitations. Windows 10 introduces native support for those features.

Feature summary

  • Allows for faster charging up to 100W with Power Delivery over USB Type-C.
  • Single connector for both USB Hosts and USB Devices.
  • Can switch USB roles to support a USB host or device.
  • Can switch power roles between sourcing and sinking power.
  • Supports other protocols like DisplayPort and Thunderbolt over USB Type-C.
  • Introduces USB Billboard device class to provide error notifications for Alternate Modes.

Official specifications

Hardware design

USB Type-C connector is reversible and symmetric.

The main component are: the USB Type-C connector and its port or PD controller that manages the CC pin logic for the connector. Such systems typically have a dual-role controller that can swap the USB role from host to function. It has Display-Out module that allows video signal to be transmitted over USB. Optionally it can support BC1.2 charger detection.

Consider recommendations for the design and development of USB components, including minimum hardware requirements, Windows Hardware Compatibility Program requirements, and other recommendations that build on those requirements.Hardware component guidelines USB

Choose a driver model

Drivers Innomtek USB Devices

Use this flow chart to determine a solution for your USB Type-C system.

If your system..Recommended solution..
Does not implement PD state machinesWrite a client driver to the UcmTcpciCx class extension.
Write a USB Type-C port controller driver
Implements PD state machines in hardware or firmware and support USB Type-C Connector System Software Interface (UCSI) over ACPILoad the Microsoft provided in-box drivers, UcmUcsiCx.sys and UcmUcsiAcpiClient.sys.
See UCSI driver.
Implements PD state machines in hardware or firmware, but either does not support UCSI, or support UCSI but requires a transport other than ACPIWrite a client driver for the UcmCx class extension.
Write a USB Type-C connector driver
Write a USB Type-C Policy Manager client driver
Implements UCSI but requires a transport other than ACPIWrite a client driver to the UcmUcsiCx class extension.
Use this sample template and modify it based on a transport that your hardware uses.
Write a UCSI client driver

Bring up drivers

  • USB Function driver bring-up is only required if you support USB Function mode. If you previously implemented a USB Function driver for a USB micro-B connector, describe the appropriate connectors as USB Type-C in the ACPI tables for the USB Function driver to continue working.

    For more information, see instructions about writing a USB Function driver.

  • USB Role-Switch driver bring-up is only required for devices that have a Dual Role controller that assumes both Host and Function roles. To bring-up the USB Role-Switch driver, you need to modify the ACPI tables to enable the Microsoft in-box USB role-switch driver.

    For more information, see the guidance for bringing up the USB Role Switch Driver.

  • A USB Connector Manager Driver is required for Windows to manage the USB Type-C ports on a system. The bring-up tasks for a USB Connector Manager driver depend on the driver that you choose for the USB Type-C ports: The Microsoft in-box UCSI (UcmUcsiCx.sys and UcmUcsiAcpiClient.sys) driver, a UcmCx client driver, or a UcmTcpciCx client driver. For more information, see the links in the preceding section that describe how to choose the right solution for your USB Type-C system.

Drivers Innomtek Usb Devices Type C

Test

Perform various functional and stress tests on systems and devices that expose a USB Type-C connector.

Test USB Type-C systems with USB Type-C ConnEx - Run USB tests included in the Windows Hardware Lab Kit (HLK) for Windows 10.

Run USB function HLK tests with a C-to-A cable (search for Windows USB Device in the HLK

Certification/ComplianceAttend Power Delivery and USB Type-C compliance workshops hosted by the standards bodies.

Drivers Innomtek USB Devices

See also